在线客服

在线客服QQ


发布信息当前位置: 首页 » 供应 » 机械 » » 排污泵 »

进口潜水排污泵(欧美进口十大品牌)

点击图片查看原图
品牌: 英国格林
单价: 面议
起订: 1 台
供货总量: 100 台
发货期限: 自买家付款之日起 30 天内发货
所在地: 上海
有效期至: 长期有效
最后更新: 2018-10-15 08:36
浏览次数: 30
询价
公司基本资料信息
 
 
产品详细说明
 英国GRIMM格林进口潜水排污泵 UK GRIMM imported submersible sewage pump

进口潜水排污泵.jpg

 

英国GRIMM格林进口潜水排污泵概述:
            进口潜水排污泵,是一种机泵一体的下泵潜水电泵,是在英国格林先进技术的基础上,结合国内水泵的使用特点而研制成功的新一代泵类产品。叶轮采用了先进的水力模型设计,并精密铸造而成,具有节能效果显著、防缠绕、无堵塞等特点。在排送固体颗粒和长纤维垃圾等方面具有独特效果。点叶片或双叶片叶轮结构,它类似于一截面大小相同的弯管。具有非常好的过流性。配以合理的蜗室,确保了该产品的高过流条件下的高效率。是一种理想的排污电泵。

英国GRIMM格林进口潜水排污泵特点:
1、采用独特的单叶片或双叶片叶轮结构,大大提高了污物通过能力,能有效的通过泵口径的5倍纤维物质与直径为泵口径约50%的固体颗粒。
2、机械密封采用采用新型硬质耐腐的碳化钨材料,同时将密封改进为双端面密封,使其长期处于油室内运行,可使泵安全连续运行8000小时以上。
3、整体结构紧凑、体积小、噪声低、节能效果显著,检修方便,无需建泵房,潜入水中即可工作,大大减少工程造价。
4、该泵密封油室内设置有高精度抗干扰漏水检测传感器,及定子绕组内预埋了热敏元件,对水泵电机自动保护。
5、可根据用户需要配备全自动安全保护控制柜,对泵的漏水、漏电、过载及超温等进行自动保护,提高了产品的安全性与可靠性。
6、可根据用户需要配备双导轨自动耦合安装系统,它给安装、维修带来更大方便,人可不必为此而进入污水坑。
8、能够在全扬程范围内使用,而保证电机不会过载。
9、有两种不同的安装方式,固定式自动耦合安装系统、移动式自由安装系统。

英国GRIMM格林进口潜水排污泵使用条件:

1、介质温度不超过40℃;介质密度≤1200kg/m3,PH值在5-9范围之内。
2、运行时不得低于最低液位,参见安装尺寸图中的“▶最低液位”(含自动冷却系统)。▽为为自动冷却系统时最低液位。
3、额定电压为380V,额定频率为50Hz。在额定电压和额定频率的偏差不大于5%时,电机才能正常运行。
4、通过泵的固体颗粒的最大直径不得大于泵体排出口直径的50%。

英国GRIMM格林进口潜水排污泵技术参数:    
流       量:5-1800m3/h
扬       程:7-60m
口       径:25-400mm
转       速:1450-2900r/min
功       率:0.75-75kw
电       压:380V
密       封:碳化钨,双端面密封
材       质:铸铁、不锈钢
连接方式:螺纹,法兰

英国GRIMM格林进口潜水排污泵主要用途:

          进口潜水排污泵主要用于市政工程、工业建筑、宾馆、医院、人防、矿山等行业,可用于排送带固体颗粒及各种唱纤维的污水、废水、雨水和城市生活用水。

UK GRIMM imported submersible sewage pump summary:

 

           The import of non clogging submersible sewage pump referred to as import submersible sewage pump, a pump body pump submersible pump, is based on the introduction of British Green advanced technology, combined with the use of domestic water pump features a new generation of pumps and the successful development of. The impeller adopts the advanced hydraulic model design, and is made of precision casting. It has the characteristics of energy saving, remarkable effect, anti winding and no clogging. It has unique effects on solid particles and long fiber waste. The structure of a point or two blade impeller, similar to a bend of the same size. Has very good over-current. A reasonable volute chamber ensures high efficiency of the product under high flow conditions. The utility model is an ideal sewage discharge pump.

UK GRIMM imported submersible sewage pump characteristic:

 

 

 

1.The use of unique single leaf or double vane impeller structure, greatly improved the passing capacity of dirt, can effectively pump through the caliber of 5 times the fiber material and diameter of the pump diameter of about 50% of solid particles.

2.Mechanical seal adopts new hard corrosion resistant tungsten carbide material, at the same time to improve the seal for double end sealing, so that it is long-term in the oil room running, can make the pump safe and continuous operation for more than 8000 hours.

3.The overall compact structure, small size, low noise, energy-saving effect is remarkable, easy maintenance, no construction of pump room, submerged into the water can work, greatly reducing the cost of construction.

4.The pump is equipped with a high precision anti-interference water leakage detection sensor, and the stator winding is embedded with a heat sensitive element to automatically protect the water pump motor.

5.According to user needs equipped with automatic safety control cabinet, the water leakage, leakage, overload and overtemperature, automatic protection, improve the product safety and reliability.

6.According to user needs with double rail automatic coupling installation system, it to installation and maintenance more convenient, people do not have to enter the sewage pit.

8.Can be used in the whole head range, and ensure that the motor will not overload.

9.There are two different installation methods, fixed automatic coupling installation system, mobile free installation system.

UK GRIMM imported submersible sewage pump use condition:

1.The medium temperature is less than 40 ℃; medium density is less than 1200kg/m3, the pH value in the range of 5-9.

2.Operation shall not be lower than the minimum level, see the installation size figure of the "lowest level" status "(including automatic cooling system). As for the automatic cooling system at the lowest level.

3.Rated voltage is 380V, rated frequency is 50Hz. When the deviation of the rated voltage and the rated frequency is not more than 5%, the motor can work normally.

4.The maximum diameter of the solid particles through the pump shall not be greater than 50% of the diameter of the pump outlet.

UK GRIMM imported submersible sewage pump technical parameters:

 

 

 

 

Flow rate: 5-1800m3/h

Lift: 7-60m

Caliber: 25-400mm

Speed: 1450-2900r/min

Power: 0.75-75kw

Voltage: 380V

Sealing: tungsten carbide, double face seal

Material: cast iron, stainless steel

Connection: thread, flange

UK GRIMM imported submersible sewage pump main use:

 

 

 

           The import of submersible sewage pump is mainly used in municipal engineering, industrial buildings, hotels, hospitals, civil air defense, mining and other industries, can be used for discharge of solid particles and fibers sing sewage and waste water and rainwater and the city life water.

0条 [查看全部]  相关评论
 
更多»本企业其它产品

[ 供应搜索 ]  [ 加入收藏 ]  [ 告诉好友 ]  [ 打印本文 ]  [ 违规举报 ]  [ 关闭窗口 ]

网站首页 | 会员服务 | 关于我们 | 联系方式 | 使用协议 | 版权隐私 | 发布技巧 | 网站地图 | 排名推广 | 广告服务 | 积分换礼 | 网站留言 | RSS订阅| 网站索引